Submissions

This journal is not accepting submissions at this time.

Author Guidelines

The journal is now accepting manuscript submissions for the upcoming issue. We invite researchers and scholars to submit articles.

Challenges and Issues of Modern Science, Vol. 4, No. 1 (2025):
Submission deadline
:  May 12, 2025.
Issue publication date: the second half of June 2025.

Challenges and Issues of Modern Science, Vol. 4, No. 2 (2025):
Submission deadline
:  October 20, 2025.
Issue publication date: the second half of November 2025.

Introduction

Only original manuscripts that have not been previously published in any form, including publications in other languages, and that are not under consideration by other journals or other kinds of publications, may be submitted to the journal Challenges and Issues of Modern Science.

Submitting the same manuscript to multiple journals or other publications is prohibited not only at the time of submission to Challenges and Issues of Modern Science but also throughout the entire review process and after its publication in this journal.

Authors bear full responsibility and guarantee that the submission does not contain information with restricted access, including but not limited to state secrets, trade secrets, confidential information, personal data without the necessary consent for publication, and any other information that, according to current legislation, is not subject to disclosure. The publisher and editorial board assumes no responsibility for any violations related to the disclosure of such information.

If the manuscript submitted to Challenges and Issues of Modern Science continues to develop the authors' research theme and is based on previously published works, authors are required to clearly indicate this and highlight the differences. The reuse of texts, figures, or other materials by the authors that have been published must be declared and approved by the rights holder in accordance with their licensing and copyright policies.

1 Where to Start?

A successful publication in the journal begins with thorough manuscript preparation. Following the recommendations not only increases your chances of a positive review. Remember, attention to detail and responsibility enhance your scientific reputation. By adhering to these simple yet important steps, you will not only streamline the publication process but also contribute to improving the quality of scientific submissions.

  1. Familiarize yourself with the journal’s main policies. Ensure that your manuscript meets the requirements concerning the topic and other key aspects.
  2. Review the publication ethics and integrity guidelines. It is essential that your submission adequately meets ethical standards and the requirements for publication integrity.
  3. Determine the relevance of your submission to the journal’s section by fields. Choose the section that best suits your research according to the provided list of scientific fields.
  4. Spend extra time studying the requirements for formatting the abstract and bibliographic references. They should comply with the journal’s style.
  5. Download the manuscript template and its version with formatting recommendations. Using the template will simplify the manuscript preparation process and reduce the number of necessary revisions.
  6. Prepare the manuscript layout for submission. Format the manuscript according to the requirements, considering all instructions and recommendations. Ensure that it fully complies with the journal’s requirements.
  7. Familiarize yourself with the manuscript evaluation criteria on the peer review page and independently assess its compliance with the journal's requirements.

2 What Are the Next Steps?

  • Register on the website.

If you are not yet registered, create an account to gain access to all submission tools. Review the registration guide to make this process as smooth as possible. For seamless access to your account, remember or write down your username and password. Note that the system’s stated email authorization option is not functioning, so please use only your username for login.

  • Make the submission.

Make your manuscript available to editors and reviewers using the submission system on our website. Before starting the submission process, we recommend preparing all necessary metadata in a separate text file according to the specifications provided in the illustrated guide. Avoid entering metadata manually from the keyboard, as this can lead to errors.

Remember that metadata, like identifiers in programming, must be accurate. Even an extra character, such as an unnecessary Space or Enter, will distort the value. Understand that "Surname", " Surname", and "Surname " are three different values. Use the guide on the Metadata Requirements page to ensure accurate submission.

Complete the 5 steps of manuscript submission. Each of these steps is crucial for ensuring the correct presentation of your manuscript. Following the instructions will help expedite the review process and increase your chances of successful publication.

3 Terms and Conditions

3.1 Submissions are made through the Submission Panel of the Open Journal Systems on the journal’s website.

3.2 The submission is also considered an application for participation in the conference.

3.3 The manuscript must comply with the journal’s themes, policies, and requirements.

3.4 The publication of the conference abstracts does not guarantee or confirm the acceptance of the article for publication in the journal.

3.5 The publication of an article in the journal is based on a positive review outcome and compliance with all editorial requirements.

3.6 Due to limited human resources and the voluntary nature of the editorial board’s work, authors are required to take on specific responsibilities under the term “Author’s Edition”:

3.6.1 The responsibility for initial layout of the manuscript and subsequent corrections lies with the authors.

3.6.2 Authors must independently format their manuscripts according to the template provided on the journal’s website. The formatting should adhere to the guidelines and technology described in the template.

3.6.3  Authors are responsible for correcting any errors and making necessary changes to the manuscript as requested by the editor and/or reviewer.

3.6.4 The editor preparing the journal issue will only conduct essential technical editing to compile all articles into a cohesive journal.

Submission Preparation Checklist

Thу submission complies with all the requirements outlined in the Author Guidelines, including but not limited to references to other guidelines and policies, as well as the following stipulations:

  • This manuscript is original and has not been published in any form previously, including publications in other languages.
  • This manuscript is not currently under simultaneous consideration by other journals or publications and will not be submitted elsewhere during the review process and after publication in this journal.
  • This manuscript does not contain any restricted-access information.

Aerospace vehicles

In the section Aerospace Vehicles, we focus on interdisciplinary research and recommend submitting original scientific works that present new findings in the fields: 0715 Mechanics and metal trades and 0716 Motor vehicles, ships and aircraft.

Engines, Energy and Thermotechnics

Regarding the section on Engines, Energy, and Thermotechnics, we encourage the submission of original scientific papers that contribute to advancing this field, focusing on specialties such as 0713 Electricity and energy and 0716 Motor vehicles, ships and aircraft.

Innovative Technologies in Mechanical Engineering

In the section Innovative Technologies in Mechanical Engineering, we invite the publication of articles that address current issues and innovative solutions in the fields: 0714 Electronics and automation, 0715 Mechanics and metal trades, 0716 Motor vehicles, ships and aircraft.

Structural and Functional Materials

The section Structural and Functional Materials is focused on articles exploring new approaches in the relevant fields, particularly in the specialties: 0715 Mechanics and metal trades, 0716 Motor vehicles, ships and aircraft.

Integrated Automation Technologies and Robotics

The section Integrated Automation Technologies and Robotics welcomes papers that contribute to both theoretical and practical research in the fields: 0714 Electronics and automation, 0715 Mechanics and metal trades.

Control Systems, Telecommunications and Navigation

In the section Control Systems, Telecommunications and Navigation, we publish works that promote progress in science and technology, with a focus on the fields: 0714 Electronics and automation, 0716 Motor vehicles, ships and aircraft.

Information Technology and Cybersecurity

We invite to the section Information Technology and Cybersecurity papers that advance interdisciplinary research, including fields such as: 0611 Computer use, 0612 Database and network design and administration, 0613 Software and applications development and analysis, 0714 Electronics and automation.

Project Management and Leadership

We recommend submitting to the section Project Management and Leadership materials that explore current trends in the fields: 0412 Finance, banking and insurance, 0413 Management and administration, 0414 Marketing and advertising, 0415 Secretarial and office work, 0416 Wholesale and retail sales, 0611 Computer use.

Ecology, industrial and environmental safety

In the section Ecology, industrial and environmental safety we publish interdisciplinary research that analyzes challenges and prospects in the field of 0712 Environmental protection technology.

Privacy Statement

The journal Challenges and Issues of Modern Science is committed to protecting the privacy and security of our users' personal information. This statement explains what data we collect, how we use it, and what measures we take to protect it.

Information Collection

We may collect the following types of information:

  • Name, email address, and contact details
  • Data provided during registration or manuscript submission
  • Information about site usage and views

Use of Information

The collected information may be used for the following purposes:

  • Processing submitted articles and managing the editorial process
  • Improving the quality of our services and site functionality
  • Sending notifications about new issues, articles, and other journal-related news

Information Protection

We take appropriate security measures to protect your information from unauthorized access, alteration, disclosure, or destruction. Access to personal data is restricted to employees who need it to perform their duties.

Publication of Author Contact Information

After an article is published on the site, a link to the author's contact email will be displayed alongside the author's name and will be publicly accessible. This information is provided to facilitate scientific communication. Authors give their consent to such publication when submitting their article.

Information Sharing

We do not share your personal information with third parties without your consent, except when required by law or necessary to protect our rights.

Your Rights

You have the right to access your data, correct it, or request its deletion. To exercise these rights, please contact us using the contact information provided on the site.

Confidentiality of Unpublished Manuscripts

We place special emphasis on maintaining the confidentiality of unpublished manuscripts at all stages of the publishing process. This includes:

  • Manuscript Submission: During manuscript submission, information about the articles is reviewed only by the relevant editors and reviewers who are required to adhere to confidentiality principles.

  • Editorial Process: All documents submitted for review are processed in a secure environment, with access limited to those directly involved in the review and editing process.

  • Manuscript Storage: We ensure the secure storage of unpublished manuscripts and take measures to prevent unauthorized access.