Submissions

Login or Register to make a submission.

Author Guidelines

The journal is now accepting manuscript submissions for the upcoming issue. We invite researchers and scholars to submit articles.

Challenges and Issues of Modern Science, Vol. 4, No. 1 (2025):
Submission deadline:  May 12, 2025.
Issue publication date: the second half of June 2025.

Challenges and Issues of Modern Science, Vol. 4, No. 2 (2025):
Submission deadline:  October 20, 2025.
Issue publication date: the second half of November 2025.

Introduction

Only original manuscripts that have not been previously published in any form, including publications in other languages, and that are not under consideration by other journals or other kinds of publications, may be submitted to the journal Challenges and Issues of Modern Science.

Submitting the same manuscript to multiple journals or other publications is prohibited not only at the time of submission to Challenges and Issues of Modern Science but also throughout the entire review process and after its publication in this journal.

Authors bear full responsibility and guarantee that the submission does not contain information with restricted access, including but not limited to state secrets, trade secrets, confidential information, personal data without the necessary consent for publication, and any other information that, according to current legislation, is not subject to disclosure. The publisher and editorial board assumes no responsibility for any violations related to the disclosure of such information.

If the manuscript submitted to Challenges and Issues of Modern Science continues to develop the authors' research theme and is based on previously published works, authors are required to clearly indicate this and highlight the differences. The reuse of texts, figures, or other materials by the authors that have been published must be declared and approved by the rights holder in accordance with their licensing and copyright policies.

1 Where to Start?

A successful publication in the journal begins with thorough manuscript preparation. Following the recommendations not only increases your chances of a positive review. Remember, attention to detail and responsibility enhance your scientific reputation. By adhering to these simple yet important steps, you will not only streamline the publication process but also contribute to improving the quality of scientific submissions.

  1. Familiarize yourself with the journal’s main policies. Ensure that your manuscript meets the requirements concerning the topic and other key aspects.
  2. Review the publication ethics and integrity guidelines. It is essential that your submission adequately meets ethical standards and the requirements for publication integrity.
  3. Determine the relevance of your submission to the journal’s section by fields. Choose the section that best suits your research according to the provided list of scientific fields.
  4. Spend extra time studying the requirements for formatting the abstract and bibliographic references. They should comply with the journal’s style.
  5. Download the manuscript template and its version with formatting recommendations. Using the template will simplify the manuscript preparation process and reduce the number of necessary revisions.
  6. Prepare the manuscript layout for submission. Format the manuscript according to the requirements, considering all instructions and recommendations. Ensure that it fully complies with the journal’s requirements.
  7. Familiarize yourself with the manuscript evaluation criteria on the peer review page and independently assess its compliance with the journal's requirements.

2 What Are the Next Steps?

  • Register on the website.

If you are not yet registered, create an account to gain access to all submission tools. Review the registration guide to make this process as smooth as possible. For seamless access to your account, remember or write down your username and password. Note that the system’s stated email authorization option is not functioning, so please use only your username for login.

  • Make the submission.

Make your manuscript available to editors and reviewers using the submission system on our website. Before starting the submission process, we recommend preparing all necessary metadata in a separate text file according to the specifications provided in the illustrated guide. Avoid entering metadata manually from the keyboard, as this can lead to errors.

Remember that metadata, like identifiers in programming, must be accurate. Even an extra character, such as an unnecessary Space or Enter, will distort the value. Understand that "Surname", " Surname", and "Surname " are three different values. Use the guide on the Metadata Requirements page to ensure accurate submission.

Complete the 5 steps of manuscript submission. Each of these steps is crucial for ensuring the correct presentation of your manuscript. Following the instructions will help expedite the review process and increase your chances of successful publication.

3 Terms and Conditions

3.1 Submissions are made through the Submission Panel of the Open Journal Systems on the journal’s website.

3.2 The submission is also considered an application for participation in the conference.

3.3 The manuscript must comply with the journal’s themes, policies, and requirements.

3.4 The publication of the conference abstracts does not guarantee or confirm the acceptance of the article for publication in the journal.

3.5 The publication of an article in the journal is based on a positive review outcome and compliance with all editorial requirements.

3.6 Due to limited human resources and the voluntary nature of the editorial board’s work, authors are required to take on specific responsibilities under the term “Author’s Edition”:

3.6.1 The responsibility for initial layout of the manuscript and subsequent corrections lies with the authors.

3.6.2 Authors must independently format their manuscripts according to the template provided on the journal’s website. The formatting should adhere to the guidelines and technology described in the template.

3.6.3  Authors are responsible for correcting any errors and making necessary changes to the manuscript as requested by the editor and/or reviewer.

3.6.4 The editor preparing the journal issue will only conduct essential technical editing to compile all articles into a cohesive journal.

Submission Preparation Checklist

Thу submission complies with all the requirements outlined in the Author Guidelines, including but not limited to references to other guidelines and policies, as well as the following stipulations:

  • This manuscript is original and has not been published in any form previously, including publications in other languages.
  • This manuscript is not currently under simultaneous consideration by other journals or publications and will not be submitted elsewhere during the review process and after publication in this journal.
  • This manuscript does not contain any restricted-access information.

Aerospace vehicles

The section is dedicated to publishing research focused on the advancement of aerospace engineering, including airplanes, helicopters, unmanned systems, rocket and space technology, and other types of aircraft. The primary focus is on mechanical engineering, encompassing the improvement of aerodynamic characteristics, optimization of structural strength, and enhancement of system reliability and operational performance. A particular emphasis is placed on avionics-related mechanical aspects, including the design and dynamics of moving components, the integration of sensor systems, and ensuring the stability and controllability of aircraft. Given the complexity of modern aerospace technologies, the section also welcomes interdisciplinary research that integrates applied mechanics, materials science, industrial engineering, as well as cutting-edge approaches in digital modeling and software solutions for design, engineering analysis, and testing. The presented studies contribute to the implementation of innovations and the expansion of scientific and practical approaches in the development and improvement of aircraft.

Engines, Energy and Thermotechnics

The section is dedicated to publications that contribute to the development of energy technologies, particularly in the fields of electrical engineering, thermal energy, and renewable energy sources. Significant attention is given to research focused on improving the efficiency of energy systems, including advancements in generation, transmission, and storage processes. Issues related to the integration of renewable energy sources into energy systems, particularly the use of solar, wind, and hydro energy, are also highlighted. The section also covers topics related to the development of engines for aviation and rocket-space technology, including rocket engines and propulsion systems for aircraft, as well as avionics, which ensure the control of these systems. Interdisciplinary research that encompasses energy engineering, mechanics, electromechanics, and digital technologies for optimizing energy processes, as well as the development of innovative energy systems and management systems, is encouraged. The works presented in the section contribute to innovations and the advancement of technologies in the fields of energy and aerospace engineering.

Innovative Technologies in Mechanical Engineering

The section is dedicated to current issues and innovative approaches in various areas of production, addressing the modern challenges of mechanical engineering as a multidisciplinary scientific field in the context of digitalization. In particular, it emphasizes the integration of digital technologies, artificial intelligence, and computer modeling into the processes of design, analysis, and production management, which contribute to improving the quality, reliability, and economic efficiency of production systems, as well as enhancing production flexibility and product competitiveness. The focus on the synergy of traditional mechanical approaches with modern digital solutions is encouraged, facilitating the creation of intelligent automation and robotics systems. The presented research is aimed at solving complex problems related to optimizing technological chains, quality control, and product life cycle management, which are of strategic importance for the further development of the industry.

Structural and Functional Materials

The section is dedicated to publishing research on the structural and functional properties of materials, considering modern interdisciplinary approaches in materials science. The presented studies cover both fundamental and applied aspects of material synthesis, processing, and modification, the correlation between microstructure and macroscopic properties, as well as the optimization of structural parameters to ensure high reliability and functionality under operational conditions. Emphasis is placed on the development of materials that meet the demands of engineering, manufacturing, and construction technologies, particularly through the use of advanced digital modeling methods and additive technologies. The section integrates knowledge from mechanics, thermodynamics, solid-state chemistry, and related fields to drive innovative solutions in materials science.

Integrated Automation Technologies and Robotics

The section focuses on research in the field of automation, computer-integrated technologies, and robotics, encompassing software development, intelligent control systems, and mechanical components of automated and robotic systems. The presented studies include the analysis of methods and algorithms for optimizing manufacturing processes, integrating artificial intelligence and machine learning into system control, modeling, and digital design of mechatronic and robotic systems. Special attention is given to engineering approaches for the development of sensor technologies, cyber-physical systems, adaptive mechanisms, and automatic control systems. The section combines interdisciplinary research in software engineering, mechanics, electronics, and manufacturing technologies, promoting the implementation of innovative solutions in automated and robotic production.

Control Systems, Telecommunications and Navigation

Contemporary research in control systems, telecommunications, and navigation focuses on developing integrated solutions that address the challenges of digital transformation and high-speed communication networks. Innovative algorithms for automated control, data exchange systems utilizing 5G technologies, satellite communications, and network security methods are analyzed, alongside adaptive navigation approaches for precise positioning in dynamic environments. The interdisciplinary integration of modern advancements in software engineering, information systems, automation, and aerospace technologies contributes to the creation of effective control systems for applications in military and civil aviation, automotive engineering, shipbuilding, and related industries.

Information Technology and Cybersecurity

The section is dedicated to publishing interdisciplinary research that integrates modern advancements in software development, information systems management, and data protection. The contributions cover both the fundamental aspects of creating high-performance applications and optimizing databases, as well as the development of innovative approaches in network administration and cybersecurity. Special attention is given to cloud computing technologies, the organization of remote work processes, and the integration of the Internet of Things to secure information flows in the context of digital transformation. Modern methods of artificial intelligence and machine learning are applied for the analysis of cyber threats, the development of monitoring systems, and incident prevention, contributing to the establishment of reliable information environments on a global scale.

Project Management and Leadership

Modern research in project management and leadership focuses on developing adaptive management strategies that account for the complexity of today's business environment, market risk dynamics, and the challenges of digital transformation. The analysis covers effective approaches to strategic planning, financial management, risk assessment, and decision-making under uncertainty. Significant attention is given to leadership models, corporate governance, innovative management practices, and marketing strategies that contribute to the sustainable development of organizations. The integration of interdisciplinary approaches enables the assessment of the interconnection between project management, finance, and business strategies, which is crucial for the successful operation of companies in the global economy.

Market Synergy

The section is dedicated to publishing interdisciplinary research that integrates economic theory with the practice of trade and other commercial activity, considering modern approaches in management, marketing, and digitalization within the context of transnational processes that affect the economy, trade, and society. The presented works are aimed at developing methodologies for market analysis and forecasting in the context of sustainable development and the implementation of environmentally friendly technologies, which are increasingly relevant for strategic decision-making in business, finance, logistics, and related fields. The synergy of economic processes with digital tools, information systems, automated solutions, and engineering approaches opens new perspectives for interdisciplinary research and the practical realization of innovative developments.

Ecology, industrial and environmental safety

Modern research in the field of ecology, industrial, and technogenic safety focuses on the development of innovative environmental technologies, the assessment of industrial production impacts on the environment, and the formation of sustainable development strategies. Significant attention is given to methods for preventing environmental risks, comprehensive industrial waste processing, resource recycling technologies, and the use of environmentally friendly materials. The study also covers environmental monitoring, ecological auditing, and the assessment of technogenic risks. Additionally, aspects of occupational safety management and consultative approaches to risk reduction in industrial ecology are explored. The integration of modern environmental standards and technologies contributes to minimizing the negative impact of human activities and ensuring the ecological safety of industrial facilities.

Copyright Notice

Authors who publish with the journal Challenges and Issues of Modern Science retain copyright to their work and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International (CC BY) license, which allows others to freely distribute the work with an acknowledgement of the work's authorship and initial publication in this journal.

Copyright

  • Authors retain copyright to their articles.
  • Authors agree to the terms of the Creative Commons Attribution 4.0 International (CC BY) license, which allows others to distribute, remix, adapt, and build upon the work, provided the original authorship, article title, journal name, and the CC BY license are properly cited.

Benefits for Authors

  • Retention of copyright by authors
  • Increased visibility and citation of works through open access
  • Protection of authorship and ensuring proper attribution

It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way. This type of agreement is not used for the journal Challenges and Issues of Modern Science.

Privacy Statement

The journal Challenges and Issues of Modern Science is committed to protecting the privacy and security of our users' personal information. This statement explains what data we collect, how we use it, and what measures we take to protect it.

Information Collection

We may collect the following types of information:

  • Name, email address, and contact details
  • Data provided during registration or manuscript submission
  • Information about site usage and views

Use of Information

The collected information may be used for the following purposes:

  • Processing submitted articles and managing the editorial process
  • Improving the quality of our services and site functionality
  • Sending notifications about new issues, articles, and other journal-related news

Information Protection

We take appropriate security measures to protect your information from unauthorized access, alteration, disclosure, or destruction. Access to personal data is restricted to employees who need it to perform their duties.

Publication of Author Contact Information

After an article is published on the site, a link to the author's contact email will be displayed alongside the author's name and will be publicly accessible. This information is provided to facilitate scientific communication. Authors give their consent to such publication when submitting their article.

Information Sharing

We do not share your personal information with third parties without your consent, except when required by law or necessary to protect our rights.

Your Rights

You have the right to access your data, correct it, or request its deletion. To exercise these rights, please contact us using the contact information provided on the site.

Confidentiality of Unpublished Manuscripts

We place special emphasis on maintaining the confidentiality of unpublished manuscripts at all stages of the publishing process. This includes:

  • Manuscript Submission: During manuscript submission, information about the articles is reviewed only by the relevant editors and reviewers who are required to adhere to confidentiality principles.

  • Editorial Process: All documents submitted for review are processed in a secure environment, with access limited to those directly involved in the review and editing process.

  • Manuscript Storage: We ensure the secure storage of unpublished manuscripts and take measures to prevent unauthorized access.