Homogeneous Model in Finite Element Analysis for Natural Frequency Calculation of Axisymmetric Shells
Authors
-
Volodymyr Lipovskyi✉
Oles Honchar Dnipro National University
Author
https://orcid.org/0000-0002-7939-7973
Keywords:
natural frequencies, finite element method, axisymmetric shells, simplified homogeneous model, shell geometry, computation time reductionAbstract
Purpose. The article aims to provide practical recommendations for calculating natural frequencies in axisymmetric shells using finite element methods. It focuses on the need to develop a simplified model that can be used in any modern finite element software package. The study analyzes the impact of the simplified homogeneous model on the deviation and error of natural frequencies compared to real structures. Design / Method / Approach. The research is based on creating a simplified shell geometry by determining parameters such as shell thickness and density. These parameters are derived under the condition of equivalence in the moment of inertia and mass of the cross-sectional element. These parameters can vary along the height of the shell. Findings. The natural frequencies of the experimental shell with complex geometry were calculated and compared with those of the simplified model. The deviations and errors in the calculated frequencies were determined. It was demonstrated that the simplified model allows the calculation of natural frequencies with a deviation of no more than 1% from the experimental model, while significantly reducing computation time and the required computer resources. Theoretical Implications. The research expands the understanding of challenges in calculating the natural frequencies of complex objects using finite element methods under limited computational resources. Practical Implications. Practical recommendations are provided for engineers and designers when performing modeling tasks in the mechanics of deformable solid bodies. Originality / Value. The article presents an original analysis of a real case where a simplified model was implemented to determine the natural harmonics of a liquid rocket engine nozzle, making it a valuable tool for studying complex structures. Research Limitations / Future Research. The study is limited to the analysis of determining the natural frequencies of axisymmetric shells and does not cover all possible geometric features. Future research may focus on developing simplified models based on the equivalence of stiffness and mass parameters. Article Type. Case study, practical article.
Downloads
References
Abaqus. (2009). Abaqus user subroutines reference guide (v 6.6). Engineering School Class Web Sites. https://tinyurl.com/yn2zcv3s
Amabili, M. (2008). Nonlinear vibrations and stability of shells and plates. Cambridge University Press. https://doi.org/10.1017/CBO9780511619694
López Cela, J. J., Huerta, C., & Alarcón, E. (2000). Numerical analysis of axisymmetric shells by one-dimensional continuum elements suitable for high frequency excitations. Computers & Structures, 78(5), 711–724. https://doi.org/10.1016/s0045-7949(00)00048-1
COMSOL. (2023). COMSOL reference manual (v 6.2). COMSOL. https://tinyurl.com/7arf7af3
Dey, T., & Ramachandra, L. S. (2015). Dynamic stability of simply supported composite cylindrical shells under partial axial loading. Journal of Sound and Vibration, 353, 272–291. https://doi.org/10.1016/j.jsv.2015.05.021
Hexagon. (2022). MSC Nastran 2022.1 quick reference guide. Hexagon. https://tinyurl.com/4ur5wnrr
Jansen, E. L. (2002). Non-stationary flexural vibration behaviour of a cylindrical shell. International Journal of Non-Linear Mechanics, 37(4–5), 937–949. https://doi.org/10.1016/s0020-7462(01)00107-x
Mukherjee, A., Sarkar, S., & Banerjee, A. (2021). Nonlinear eigenvalue analysis for spectral element method. Computers & Structures, 242, 106367. https://doi.org/10.1016/j.compstruc.2020.106367
Popov, A. A., Thompson, J. M. T., & McRobie, F. A. (1998). Low dimensional models of shell vibrations. parametrically excited vibrations of cylinder shells. Journal of Sound and Vibration, 209(1), 163–186. https://doi.org/10.1006/jsvi.1997.1279
Rahman, T., Jansen, E. L., & Tiso, P. (2011). A finite element-based perturbation method for nonlinear free vibration analysis of composite cylindrical shells. International Journal of Structural Stability and Dynamics, 11(04), 717–734. https://doi.org/10.1142/s0219455411004312
Strozzi, M., & Pellicano, F. (2013). Nonlinear vibrations of functionally graded cylindrical shells. Thin-Walled Structures, 67, 63–77. https://doi.org/10.1016/j.tws.2013.01.009
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Volodymyr Lipovskyi (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in the journal Challenges and Issues of Modern Science are licensed under the Creative Commons Attribution 4.0 International (CC BY) license. This means that you are free to:
- Share, copy, and redistribute the article in any medium or format
- Adapt, remix, transform, and build upon the article
as long as you provide appropriate credit to the original work, include the authors' names, article title, journal name, and indicate that the work is licensed under CC BY. Any use of the material should not imply endorsement by the authors or the journal.
